- The new GE NovaLT16 gas turbine will provide up to 37% mechanical efficiency — raising the standards of efficient and reliable oil and gas applications within the 10-20MW power range.
- Rated for 16.5MW and 7,800RPM, it is ideally suited for pipeline compression, power generation and oil and gas plant compression applications. Ability to withstand high value of pitch and roll makes NovaLT16 a great fit also for offshore compression and power generation.
- As a result of a GE – TransCanada Corporation collaboration on the pipeline configuration of the unit, the two companies signed a Memorandum of Understanding (MOU) to progress development of NovaLT16 gas turbine including technical evaluation, gas station layout optimization and negotiation of the terms and conditions for purchase.
- Increased efficiency and reduced emissions over a wide operating range make the operability of the new gas turbine extremely flexible. The new turbine features high availability (up to 99%) and reliability thanks to four years of continuous operation between maintenance cycles.
HOUSTON, TX, Sept. 23, 2014 /CNW/ – GE (NYSE:GE) today at Turbomachinery Symposium, Houston, announced the launch of a new 16.5 megawatt (MW) gas turbine (NovaLT16) for mechanical drive and power generation applications in the oil and gas industry. Developed by GE Oil & Gas to meet the industry’s evolving challenges, NovaLT16 combines the best technology from industry-proven GE turbines and benefits from the industry insights of TransCanada Corporation (TSX, NYSE: TRP) (TransCanada), a major North American energy infrastructure company.
Today’s oil and gas operators need to transport gas from more remote locations, in harsh environments and under more stringent regulations. These challenges increase demand for efficiency, emissions reduction and maintainability of the critical equipment. The 16.5 MW NovaLT16 gas turbine will provide up to 37 per cent mechanical efficiency, which raises the standards of efficient and reliable pipeline compressions, power generation and oil and gas plant compression applications thereby helping to meet increasing energy demand across the world.
“We strive to remain an innovator and to continue testing new technology that could result in cost savings and emission reductions within our facilities,” said David Montemurro, Vice President, Facilities and Pipeline Projects, TransCanada. “We’re pleased to have signed the MOU to highlight our commitment towards the development of a more energy efficient gas turbine”.
“This collaboration with TransCanada has enabled us to develop a winning alternative for the oil and gas industry in North America,” said Rafael Santana, CEO and President Turbomachinery Solutions, GE Oil & Gas. “Together, we will develop a solution specifically tailored to meet market challenges around increasing efficiency, reducing waste emissions and increasing reliability.”
Key features and benefits of NovaLT16
- NovaLT16 features operational flexibility over a wide load range. High efficiency and reduced emissions are achieved from 20% to 100% of the load thereby making easier to meet operating conditions not foreseen at project stage. Seasonal combustion mapping is not required, thanks to the synergic design of the fuel system, the engine control and the combustion system.
- NovaLT16 is rated for 35,000 hours Mean Time Between Maintenance (MTBM), and up to 99% availability, which is setting new standards for GE’s turbines in the 10-20MW power range. Modular construction and easy access to auxiliary systems and wide lateral openings of gas turbine’s enclosure make maintenance and support more straightforward. A unit can be swapped in just 24 hours, reducing the amount of lost operating time to just one day.
- The gas turbine has built-in provisions for remote monitoring and diagnostics through GE’s Industrial Internet technology, with diagnostic software PredictivityTM Solutions, integrated data gathering and data transfer within its control panel. This enables any problems to be anticipated and pre-emptively addressed, reducing operating costs and the need for on-site visits for maintenance.
Development and testing of the NovaLT16 engine began in 2013. Completed units, including all auxiliaries systems and controls, are planned for release to the market in early 2016.
Key technical features of NovaLT16
- 16.5 MW shaft power.
- 2-stage HP turbine features Single Crystal buckets to provide best available metallurgy for higher efficiency and extended durability.
- 2-stage LP turbine with variable geometry first stage nozzle maintains high efficiency and lower emissions over wide operating range.
- Single annular combustor – now guaranteeing 25 ppm of NOx emissions.
- Ruggedized DLN single annular combustor and 360° combustion casing delivers a compact and flexible design with reduced emissions.
- Three variable geometry stages (IGV, S1 and S2) for wide speed range and surge robustness.
- 35,000 hours MTBM – corresponds to four years of continuous operation without the need for maintenance stops.
About GE Oil & Gas
GE Oil & Gas works on the things that matter in the oil and gas industry. In collaboration with our customers, we push the boundaries of technology to bring energy to the world. From extraction to transportation to end use, we address today’s toughest challenges in order to fuel the future. Follow GE Oil & Gas on Twitter @GE_OilandGas.
SOURCE General Electric Canada Inc.
For further information: Sara Hassett, GE Oil & Gas, +39 055 4233361, +39 348 2740230, firstname.lastname@example.org; Barbara Del Sala, GE Oil & Gas, +39 055 4586980, +39 342 5635184, email@example.com; TransCanada Media Line, +1-800-608-7859